Lacer Hydro-Irrigator Spare 5 Heads

Instructions for Use: 1. Remove your current irrigator head by pulling it straight off the irrigator handle. 2. Firmly push the new Lacer Hydro-Irrigator head onto the handle until it clicks into place. 3. Fill the irrigator reservoir with lukewarm water. 4. Select the desired pressure setting on your Lacer Hydro-Irrigator (consult your irrigator's instructions for guidance). 5. Lean over the sink and place the irrigator head in your mouth before turning the unit on. 6. Direct the stream of water along the gumline, pausing briefly between teeth. 7. Irrigate all areas of your mouth, including hard-to-reach areas at the back. 8. Once finished, empty the reservoir and rinse the irrigator head under running water. Allow it to air dry.

Recommended Frequency: Use daily, ideally after brushing and flossing, for optimal oral hygiene.

Additional Tips: For best results: Use lukewarm water. Do not fill the reservoir with mouthwash or other solutions unless specifically recommended by your dentist.
For sensitive gums: Start with the lowest pressure setting and gradually increase as needed.
Head Replacement: Replace the irrigator head every 3 months, or sooner if it becomes worn or damaged.
Consult your dentist or dental hygienist for personalized advice on using an oral irrigator and for specific recommendations regarding your oral health needs.